You now positionHome pageProductP22

P22  ESN GEARESN CLP 68 100 150 220
DESCRIPTION
Extreme pressure sulfophosphorated oils intended for lubrication of industrial gears.

APPLICATIONS
The comprehensive GEARESN CLP range is used for the lubrication of all types of mechanical transmissions.
- Mechanical gear boxes.
- Bevel gears.
- Reduction gears and worm gears.
- Speed variators.
- Any equipment where an extreme pressure oil is recommended.
The very high viscosity grades are particularly suited to the following application:
- Furnace vaults and cement plant mills.
- Mechanical transmissions of rail engine stock(locomotive bogies)
- Gears in semi-sealed casing.
- Centralized lubrication of sugar cane mill bearings.
The main industries using these oils:
- Iron and steel industry
- Production engineering
- Rubber and plastic materials
- Paper
- Chemical
- Rail transport.

PROPERTIES
The GEARESN CLP are modern extreme pressure lubricants specially designed to keep up with technical developments in mechanical transmissions using current and future gears. They are intended to ensure lubrication of mechanical transmissions operating under severe conditions:
- high loads,
- high temperatures,
- moist atmospheres.
For this purpose, GEARESN CLP oils have the following properties:
- Excellent extreme pressure level
High load capacity to provide protection against seizing and to maintain an oil film under high pressure. This property is particularly desirable for use where shock and overloading conditions prevail.
The very good result on the TIMKEN machine(65 lbs load OK)demonstrates this property.
- Anti-wear
Under arduous operating conditions, GEARESN GLP oils prevent formation of pitting(wear due to surface fatigue)and reduce wear.
When submitted to the FZG test on a machine in procedures A/8.3/90and A/16.6/90,they give a plateau damage>13 which is outstanding.
- Chemical and thermal stability-Resistance to oxidation
These two properties are provided by the careful choice of additives in REDUCTELF SP oils which allows them to be used at operating temperatures in excess of 100℃.
The ASTM D2893 oxidation test conducted on a sample of GEARESN GLP maintained at 95℃ or 312 hours in the presence of an air sweep of 151/h confirms the excellent resistance of the lubricant:
- stability of physico-chemical properties,
- no sediment or deposit.
- Demulsification properties
Lubricants may be polluted by the accidental entry of water ( condensation, leaks from the cooling circuit or from other sources)and the oil must be able to separate rapidly form this water as is the case with GEARESN CLP.
- Anti-rust capacity
All the limits of the range pass the ASTM D665 test:
- Procedure A(distilled water)
- Procedure B(synthetic sea water)
And thus guarantee a good anti-rust protection if contaminated by water.
- Anti-corrosion properties
The GEARESN GLP oils have no corrosive action on copper. The ASTM D130 test give a value of la.
- Anti-foam properties
Whether using splash or forced flow lubrication, agitation and turbulence of the oil in the gear case form an emulsion of air in the oil .Therefore, it is necessary to limit the extent of this air emulsion which reduces the effectiveness of the lubrication and tends to oxidize the lubricant, The GEARESN CLP oil have a very good anti-foam ability confirmed in test NF T60.129.
- Compatibility with elastomers
The GEARESN CLP oils are compatible with conventional elastomers used for sealing gear casing.

STANDARDS AND SPECIFICA-TIONS ISO,ASTM,DIN

ISO/TR3498(1986) category CKC
AFNOR NF E 60.200(1981) category CC
DIN 51517 Part 3(1979) gorupCLP
DIN 51502(1979) gorupCLP
Siderurgie Francaise NS384 A(1976)FT 161
Charbonnages de France M82 654 RV EP

HEALTH AND SAFETY

GEARESN CLP is not toxic under normal operation conditions.A material safety data sheet is available on request.
MAIN CHARCTERISTICS
CHARACTERISTICS METHODS UNITS ESN CIRCULATION
68 100 150 220
Specific gravity at 15℃
Kinematic viscosity at 40℃
Kinematic viscosity at 100℃
Viscosity index
Pour point, O.C
Pour point
Acidity
Aniline point
Ash
Corrosion with water
4 ball machine EPO
Lwi
Loading before seizing
Welding load
ASTM D1298
ASTM D445
ASTM D445
ASTM D2270
ASTM D927
ASTM D97
ASTM D974
ASTM D611
ASTM D482
ASTM D665
ASTM D2783



Kg/dm3
㎜3/s
㎜3/s



MgKOH/g

%


Dan
Dan
Dan

0.885
70
8.80
101
200
-24
0.5
106
0.012
Pass

49.1
126
315

0.892
108
10.1
98
205
-21
0.5
107
0.012
pass




0.895
142
14.2
98
215
-21
0.5
108
0.012
pass




0.905
220
19.3
99
222
-18
0.5
109
0.012
Pass

50.9
126
315


Return the product row form
 
版權所有:昆山隆美潤滑油有限公司 昆山益斯恩润滑油有限公司    製作維護:蘇州希傑網絡