You now positionHome pageProductP08

P08  ESN CMPSESN DAC 68 100 150
DESCRIPTION
Paraffinic type mineral oils obtained from narrow distillation cuts with specific additive to comply with thermal lubrication requirements for reciprocating air compressors.
CLASSIFICSTION
Classification of lubricants for reciprocating air compressors: NF-ISO 6743-3A
ESN CMPSESN DAC oils conform to the following definitions:
- Average service: DAB symbol
- Severe service: DAC symbol and also
- DIN 51006 VB and VB-L,VC and VC-L,VD-L
APPLICATIONS
Lubrication of all types of reciprocating air compressors.
These products are suitable for different lubrication systems:
- lubrication of crankcases
- lubrication of cylinders and liners by a separate circuit(drip feed lubrication or other systems)
- joint lubrication of casing and cylinders
PROPERTIES
NARROW DISTILLATION CUT
CMPSESN DAC is manufactured from narrow viscosity cuts. This results in an adequate supply of lubricant to the cold sections without risking accumulation of heavy fractions which could generate carbon deposits in the high temperature zones.
Continued use of CMPSESN DAC ensures clean valves, valve seats and discharge pipes.
RESISTANCE TO OXIDATION
Oxidation of fine droplets of oil dispersed in hot air is controlled. This control of chemical decom-position enhances the safety provided by the use of CMPSESN DAC
HIGH VISCOSITY INDEX
CMPSESN DAC provides excellent lubrication of bearing and cylinders over a wide range of functional or climatic temperatures.
- startup of compressors at low temperature.
- Extra film strength of CMPSESN DAC provides protection and lubrication for compressor components exposed to high temperatures, cylinders, piston rings, valves, etc.

ANTI-RUST ANTI-CORROSION
PROPERTIES
CMPSESN DAC provides protection for a variety of metal components exposed to effects of condensation water.
EXCELLENT COMPATIBILITY
- With usual seals
- With plastic materials used for construction of compressed air systems, e. g. ABS
- With usual paints
MAIN CHARCTERISTICS
CHARACTERISTICS METHODS UNITS ESN CIRCULATION
68 100 150
Specific gravity at 15℃
Kinematic viscosity at 40℃
Kinematic viscosity at 100℃
Viscosity index
Aniline point
Flash point o.c
Conradson carbon residue
Ash
Copper strip corrosion
Antirust test
ASTM E100
ASTM D445
ASTM D445
ASTM D2270
ASTM D97
ASTM D92
ASTM D189
ASTM D482
ASTM D130
ASTM D665
value
Kg/d m3
㎜3/s
㎜3/s



%
%
value

0.882
68
8.6
104
-12
245
0.06
0.01
La
pass

0.887
105
11.6
102
-12
270
0.06
0.01
La
pass

0.887
105
11.6
102
-12
270
0.06
0.01
La
pass


Return the product row form
 
版權所有:昆山隆美潤滑油有限公司 昆山益斯恩润滑油有限公司    製作維護:蘇州希傑網絡